USER’S MANUAL / bit Tune /
69
*
This section highlights the calibration phases of the time delays of an Audison bit processor interfaced to the system
with the aid of the bit Tune.
The process is included in the AUTO EQ + AUTO TIME ALIGNMENT procedure
to set the time delays of the speakers through an Audison bit processor.
The operation is performed with a system including an Audison processor previously finalized.
*
Install the
HSM
and
LSM
inside the passenger compartment of the vehicle as described in
.
7
7.7
AUTOMATIC CALCULATION OF TIME DELAYS: AUTO TIME ALIGNMENT
PHONE
REM
IN
REM
OUT
12 V
KEY
SW
INPUTS
MUTE IN
FL FR RR
RL
AD Link
AC Link
*
*
DIGITAL
SIGNAL
OUTPUTS
AUX INPUTS
AP bit
AUX 1 INPUTS
SIGNAL INPUTS
SIGNAL INPUTS
SIGNAL
OUTPUTS
DIGITAL SIGNAL
OUTPUTS
Fig. 1
Fig. 2
AUX INPUTS
SIGNAL INPUTS
Fig 3.
IMPORTANT:
In the processors you
should enable the AUX input
if you use a bit Ten/D or AUX1
if you use a bit One through
PC software. This can be disabled
after the measurements. If you want to
connect the bit Tune to AP bit amplifiers to
perform measurements, but the AUX input
port is already occupied, you can use the
OPTICAL input port
