USER’S MANUAL / bit Tune /
42
2. Flat Curve:
Restores the equalizer linearly (Flat) for a curve that was created earlier.
3. OK:
Confirms the changes entered for the Target curve, making it available to the Processor Auto setup,
without saving it to your PC.
4. Save Curve:
Saves in a file the complete configuration of a set curve (e.g. “curve.srv”), which can be
reloaded at a later time within the bit Tune with the Load Curve function.
5. Delete a Curve :
Deletes a previously saved response curve.
6.
Import Curve:
Loads a Target Curve previously saved on the PC.
7. Close:
Closes the window without making any change/variations to the Target Curve.
Refer to
6
