128-8261
13 of 24
Page 13
DAILY START TIMER
Press the lock buttons simultaneously for 1 second at
the time you want the vehicle to start. The vehicle will chirp once
indicating that the automatic start timer has been activated for the
current time when the button combination was pressed. The
vehicle will then start automatically at the same time the following
day, providing that the exit procedure is followed. Pressing this
button combination a second time will toggle this feature off. Note
the transmitter must be within range of the vehicle to set this feature. The unit
will start at the preset time once only. This function must be activated each time
you want the vehicle to start. To activate this function,
(a) Turn the ignition switch off.
(b) Within 10 seconds of step a, depress and hold the brake pedal, while
pressing the key icon transmitter button 2 times.
(c) The vehicle will emit 2 chirps, indicating that the unit will start at the preset
time.
Note: the will start once and run for the prescribed time. If you require more
frequent starting please refer to auto start up timer mode shown earlier in this
guide.
Note: To insure accurate 24 Hour Start up, it is advisable to reset the start time
periodically, by pressing the lock + option button at the desired start time, as
time on the OLED unit may drift slightly each day.
TELEMATIC UPGRADE:
This system has the ability to have a telematic upgrade module connected to it.
This is a upgrade that can give you control of certain functions of your vehicle from
a Telephone, or in some cases a computer interface. Please check with your
installation center for most recent Telematic Upgrades. If you had a Telematic
Upgrade installed, the manual supplied with the upgrade unit will provide a opera-
tors manual advising of the features of the system and means available to control
these features of your vehicle.
PAGING FROM THE VEHICLE:
From within the vehicle, if the valet push button is pressed for three seconds, the
alarm unit in the vehicle will beep and transmit a signal to the OLED remote
control alerting that someone is paging them from the vehicle. A beep tone will be
heard at the OLED remote, and the vehicle call screen will be displayed.
