Audiotrak AUDIOTRAK Prodigy 192, Manual

Page: 7 / 58

7
2. Preparation for hardware installation
The Prodigy 192 PCI card and other components in the computer can be easily damaged
by electrical shock. You need to use an anti-static device that can discharge the static
electricity of your body to avoid potential static damage to the cards.
1. The Prodigy 192 card is placed into the anti static plastic pouch as it is packaged.
Do not open the pouch before you install the card.
2.
Turn off the computer power and remove the power cable from your computer
power supply.
3. Remove the computer cover. Make sure that you have an available PCI slot in
your motherboard to install the Prodigy 192. Please, refer to your computer
user’s manual to remove the cover.
4. To avoid possible static shock to the computer parts, discharge it by touching
the computer case or something grounded. We recommend you to use an anti-
static device such as an anti-static wrist band.
5. When you need to hold the Prodigy 192 card, please hold it on the guide or he
edge of card. Do not grab the card by the board.