background image

WARRANTY 

 

EGO SYStems Inc. warrants the return policy to its original purchaser as follows; All EGO SYS products, 

under normal use, will be free from faulty as long as the purchaser owns this product.  

The terms of warranty is 15 months to EGO SYS distributors considering a 3-month temporary stock period 

ahead of being sold to the end user. Therefore, the actual term of warranty is 12 months to the end user.  

EGO SYS will, at its sole option, repair or replace a product, which is found to be defective. This warranty 

shall be null and void if, in the sole opinion of EGO SYS, a product failure is the result of misuse, abuse, 

modification, or misapplication. 

Except as expressly provided above, EGO SYS products are provided 'as is' without any kind of warranty. No 

claim is made for merchantability or fitness for any purpose. 

In no event will EGO SYS be liable for any direct, indirect, consequential, or incidental damages arising out of 

use of the product. 

The purchaser must contact EGO SYS or its regional representative to receive prior approval before returning 

a faulty unit. All such returns must be shipped to EGO SYS' headquarters in Seoul, Korea as being packaged 

in the original or equivalent protective packaging material (Rack, PCI card, Power Cables, connection cables), 

with freight prepaid and adequate insurance.    

If the returned product is deemed to be defective, the repaired or replacement product will be back to you at 

no extra charge via the carrier chosen by EGO SYS. 

 

TRADE MARKS 

AUDIOTRAK, AUDIOTRAK Prodigy 192 and Prodigy are trademarks of EGO SYStems Inc. IBM is a registered 

trademark of International Business Machines Corporation. Windows is a trademark of Microsoft Corporation. Other 

product and brand names are trademarks or registered trademarks of their respective companies. 

 

Your AUDIOTRAK Dealer

 

For technical support, contact Audiotrak: 

www.audiotrak.net

 

[email protected]

 

 

 

 

Second Edition Jan. 2003

 

 
All features and specifications subject to change without notice. 

Summary of Contents for AUDIOTRAK Prodigy 192



























































Reviews: