![Audiotec Fischer Match PP 52DSP Manual Download Page 23](http://html.mh-extra.com/html/audiotec-fischer/match-pp-52dsp/match-pp-52dsp_manual_3013041023.webp)
Output power RMS / max:
• Front / Rear channels @ 4 Ohms:
.............................4 x 35 / 70 Watts
• Front / Rear channels @ 2 Ohms:
.............................4 x 50 / 100 Watts
• Subwoofer output @ 2 Ohms:
....................................1 x 160 / 320 Watts (4 channels each 40/80 Watts)
Frequency range .............................................................20 Hz - 22.000 Hz
Number of input channels................................................4 x highlevel, 1 x Aux
DSP resolution .................................................................56 Bit
DSP processing power ....................................................172 MIPS
Total harmonic distortion (THD) .......................................< 0,01%
Signal-to-noise ratio.........................................................> 103 dB
Damping factor ................................................................> 100
Input impedance ..............................................................30 Ohms
Undervoltage detection....................................................9,6 Volts (max. 5 sec. down to 6 Volts)
Dimensions (H x W x D) ..................................................44 x 185 x 154 mm / 1,73 x 7,28 x 6,06“
Additional features ...........................................................fully stabilized internal power supply with start-/
stop capability, 56 bit digital signal processing,
internal memory for 2 different sound setups,
USB input, AUX input, input for optional remote
control, stereo line outputs with balanced output
transformers (floating ground).
The limited warranty comply with legal regulations.
Failures or damages caused by overload or impro-
per use are not covered by the warranty.
Please return the defective product only with a
valid proof of purchase and a detailed malfunction
description.
Technical specifications are subject to change!
Errors are reserved!
For damages on the vehicle and the device, caused
by handling errors of the device, we can’t assume
liability.
All MATCH amplifiers are tagged with a E-Certifi
-
cation number and also a CE-Certification mark.
Thereby these devices are ceritified for a use
inside vehicles inside the European Union (EU).
Technical Data
Warranty Disclaimer
23