20
Fig. 3
Connection of the amplifier to the car radio
1
The ISO female connector will either be plugged into the vehicle harness that has been dis-
connected from the car radio or a car-specific adaptor.
2
The ISO male connector will either be plugged into the car radio or into a car-specific adaptor.
3
The 20-pole connector will be plugged into the MATCH PP 52DSP amplifier.
4
Optional:
car-specific adaptor – such an adaptor may be required if the ISO connectors of the
provided PP 52DSP cable harness does not fit into your car radio.
Caution:
The PP 52DSP amplifier typically has a higher
power output than the car radio itself. Most of
the OE speakers in the car will be able to handle
this extra power easily. Nevertheless please
take care when you crank up the volume. If you
hear strong distortion, please reduce the volu-
me to an appropriate level in order to avoid da-
maging your speakers.
Note - Cars equipped with MOST bus:
In cars equipped with MOST bus structure it is
mandatory to unplug the fiber-optic cable from
the original radio connector and insert it into the
radio connector of the MATCH cable harness,
which has a dedicated recess for this.
2
3
1
4
Male and female connector
for original cable harness or
car-specific adaptor
Female connec-
tor for original
cable harness
