21
1
Ultra-low internal resistance due to solid, gold-
plated terminals; for power cables up to 50 mm² and
speaker cables up to 6 mm².
2
External connection for BRAX-Power-
Stabilizers, directly connected to the switching
transistors,guarantee exceptional high efficiency
and optimum power stabilization.
3
Mini-Blade fuses in parallel (6 x 25 Ampere) in order
to minimize the internal resistance.
4
Eight capacitors, each with 5,000 μF (in total
40,000 μF), take care of an extremely high current
impulse load. Especially designed capacitors with
8-times-contacted wound foils minimize the internal
resistance.
5
200 Ampere high-performance switching transistors.
6
Interference-free power supply due to optimized
suppression coil up to 300 Ampere with ultra-low
internal resistance.
7
Especially developed transformers with highly-
efficient core materials guarantee a total
performance of more than 1,800 Watts.
8
Optimum power supply of the transistors due to
8-times-contacted low-impedance capacitors with a
total capacity of 26,400 μF.
9
High efficiency due to super-fast Schottky power
diodes with more than 160 Ampere in total.
10
Optimum power supply of the amplifier transistors
due to special storage coils that bridge the switching
delay dead times.
11
Separate stabilized power supply for the driver
section.
12
Best signal processing due to a discretely
designed driver stage.
13
Below the lateral PC-boards there are in total
32 hand-selected high-end MOSFET transistors
which account for brilliant sound.
14
The processor continuously monitors the amplifier
and shuts it down in case of malfunctions.
Furthermore the processor controls the fan
(temperature-dependent).
15
“SPDIF AB to CD” switch for the parallel
transmission of the digital input signal of the
channel pair A / B to the amplifier channels C / D.
16
Programmable amplifiers (PGA) for the analog
volume control of the digital inputs. The volume
information is embedded in the digital audio
stream by the BRAX DSP and extracted in the
internal processor for finally adjusting the volume
in the analog domain.
17
High-current relays with gold-plated contacts
account for the internal and external protection of
the amplifier.
18
State-of-the-art BurrBrown D/A converters for the
digital inputs.
19
Premium Alps potentiometers adjust the sensitivity
of the analog inputs for perfect adaptation to the
output voltage of the connected head-unit.
20
Gold-plated RCA (cinch) inputs and outputs
guarantee an interference-free signal
transmission.
