AUDIOLINE DECT3800, Operating Instructions Manual, Page: 75 / 100

- Private Branch Exchanges / T-Net -
75
8 Private Branch Exchanges / T-Net
The
H
button on the telephone is for use in private branch exchanges and when
using the T-Net function provided by DEUTSCHEN TELEKOM.
8.1 R button on private branch exchanges
If the telephone is connected to a private branch exchange, all the functions
associated with the
H
button, such as transferring calls, automatic call back, etc.,
can be used. A private branch exchange requires a Flash time of 100 ms (refer to
9.2.3 for the settings). The dealer where you purchased the exchange can provide
information as to whether the telephone will work properly with the exchange.
8.2 R button with T-Net provided by DEUTSCHEN TELEKOM
Your AUDIOLINE telephone supports the most important added value services
provided by DEUTSCHE TELEKOM (e.g. brokering, call waiting, three-way
conferencing, etc.). T-Net operates with a Flash time of 300 ms (refer to Chapter 9.2.3
for settings). Please contact DEUTSCHE TELEKOM with regard to enabling the T-Net
functions.
8.3 Dialling pause
In the case of private branch exchanges, it is necessary to dial a specific number (e.g.
“9” or “0”) in order to obtain the dialling tone for an outside line. When using some
older private branch exchanges, it takes a little time before the dialling tone becomes
audible. Especially for such private branch exchanges, it is possible to insert an
automatic pause after the number for the outside line so that the number can be
dialled in a continuous process without having to wait for the dialling tone.
After entering the number for the outside line and before continuing with the actual
phone number, press the
#
button for approx. 2 seconds.
P
appears in the display.
After dialling the number for the outside line, the telephone then waits 3 seconds
before dialling the actual phone number.
Note: The pause can also be entered with the phone numbers in the phone book.