SA-3052A
Owner’s Manual
1-3
®
Applications
The SA-3052A is well-suited to many audio applications including but not limited
to:
• Acoustical analysis for sound reinforcement or recording studios
• Equalizer adjustment and setup
• Crossover level setting and verification of frequency
• Gain matching and setting at various stages of the signal chain
• Movie theater system setup and alignment
• Industrial noise measurement
Special Features
Rechargeable Internal Battery Pack
The rechargeable battery option allows the SA-3052A to be used independent of
AC mains power. The batteries install within the instrument and provide up to 4
hours of operation on a full charge.
The batteries are recharged by plugging the instrument into a source of AC mains
power and leaving the front panel
p
ower
switch set to
o
ff
for a period of 9 to 10
hours. When charging, the power light glows red. When fully charged the red
power light flashes occasionally.
Printer Output
The printer output option provides a Centronics parallel interface for a PC
compatible printer (not provided). The analyzer-to-printer cable is a standard
PC-type parallel printer cable (also not provided).
The printed output is a form with suitable blank spaces for recording the time and
place of the measurement and other data, followed by the a printed representation
of the real-time spectrum display on the analyzer.
On-screen score display
For quick check-ups in the shop when you don’t have a printer handy, the SA-
3052A will display the frequency response score on the screen. Of course if you
do have a printer, the SA-3052A provides complete information about the individ-
ual response deviations on a special printout.
Automatic SPL judging
Forget about finding your stopwatch. Forget about disputes over SPL scores. The
SA-3052A automatically times 30 seconds and holds the loudest SPL peak during
the count-down. An LED bar ticks off the seconds for great crowd appeal.
No computer required
The SA-3052A works directly with your PC-compatible printer. Just plug your
printer into the SA-3052A and you’re ready to go.
SC-10 Soft Carrying Case
The optional soft carrying case protects the SA-3052A from the ravages of porta
ble operation. It includes a large pocket to carry the mike and cables. There is also
a hatch on the bottom of the case to allow access to the power cord connection.
Chapter 1 - Introduction
Summary of Contents for SA-3052A
