AudioControl SA-3052A Operation Manual Download Page 45 | Manualshive

Page: 45 / 64

background image

SA-3052A

Owner’s Manual

7-1

®

Competition Scoring

Introduction

Welcome to computerized competition judging. If you’re reading this, then you are

part of the growing numbers of people who have discovered the challenge of the competi-

tion-sanctioned sound off contests. Originally, sound-offs were simple “Crank-em-Up”

contests. Now the criteria for even “placing” have become more stringent than ever.

Installation aesthetics, creativity, frequency response, imaging and sound pressure levels

all have to be considered.

In the past, the frequency response and SPL portions of competitions were scored by

hand. The amount of effort required to score even 50 cars was phenomenal. Something

had to be done. Necessity (or at least, dislike of work) has always been one of human-

kind’s greatest sources of innovation.

The AudioControl SA-3052A makes computerized scoring easy and affordable. All

you need is a SA-3052A and a parallel-type printer. The SA-3052A measures the frequen-

cy response and SPL readings, calculates the score, and prints everything out. Cool!

OPERATION

RTA / SCORING mode

When you turn on the SA-3052A analyzer, the display will show the current operat-

ing mode. It will either flash ‘-RTA-’ for normal frequency response measurement mode,

‘IASCA’ for competition scoring per IASCA rules or ‘USAC’ for USAC rules.

Chapter 7 - Contest Scoring

«
...
43
44
45
46
47
...
»

Summary of Contents for SA-3052A

































































Reviews:

No comments

Related manuals for SA-3052A

Brand: B meters Pages: 2

Brand: HANYOUNGNUX Pages: 4

Brand: Oceanic Pages: 152

Brand: Kaiterra Pages: 8

Brand: Kaiterra Pages: 12

Brand: National Instruments Pages: 15

Brand: E Instruments Pages: 144

Brand: Palstar Pages: 15

Brand: PCE Health and Fitness Pages: 11

Brand: Ratek Pages: 25

Brand: Kawai Pages: 110

Brand: Ratek Pages: 24

Brand: Amptec Research Pages: 19

Brand: Integra Pages: 32

Brand: IFM Pages: 13

KLIMA GUARD 30.5010

Brand: TFA Pages: 22

Brand: YOKOGAWA Pages: 2

Brand: Explorer Group Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands