AudioControl SA-3052A Operation Manual Download Page 62

Page: 62 / 64

SA-3052A

Owner’s Manual

10-2

WARNING:

There are no user serviceable parts inside the SA-3052A.

Lethal voltages are present inside the case. Refer all servicing to quali-

fied service personnel.

Chapter 10 - Warranty & Service Information

but not limited to any lost profits or damage to other parts of your system by hooking up

to the unit. Whether the claim is one for breach of warranty, negligence of other tort, or

any other kind of claim. Some states do not allow limitations of consequential damages.

Failure to send in a properly completed warranty card negates any service claims.
The warranty included with the unit shall supersede this plain-text version, if there is

any inconsistency between the two.

What to do if you need service

First, contact AudioControl, either by phone 425/775-8461 or FAX 425/778-3166.

We’ll verify if there is anything wrong that you can fix yourself, or arrange to have it sent

back to our factory for repair. Please include the following items with the returning unit:

1) A copy of your proof of purchase (that sales receipt we’ve been harping about).

No originals please. We cannot guarantee returning them to you.

2) A brief explanation of the trouble you are having with the SA-3052A. (You’d be

surprised how many people forget this.)

3) A return street address. (No PO Boxes, please)

4) A daytime phone number in case our tech has a question about the problem you

are having.

You’re responsible for the freight charges to us, but we’ll pay the return freight back.

We match whatever shipping method you send it to us, so if you return the unit overnight

freight, we send it back overnight. We recommend United Parcel Service (UPS) for most

shipments.

Service Information

Repair service is available at:

Attn: Service Department

22410 70th Avenue West

Mountlake Terrace, WA 98043 USA

(425)775-8461 • FAX (425)778-3166

e-mail: [email protected]

Summary of Contents for SA-3052A
































































Search results

Summary of Contents for SA-3052A

Reviews:

Related manuals for SA-3052A

Brands by name

Popular brands

AudioControl SA-3052A, Operation Manual

Search results

Summary of Contents for SA-3052A

Reviews:

Related manuals for SA-3052A

Brands by name

Popular brands