47
Concert XR series
Appendix A: Feet Removal Procedure
Note: If this was your real appendix, please consult your health care professional as it
should not look like this.
The feet of the unit can be removed to create a cleaner look when fitting the unit into
a rack.
You must make sure that the ventilation slots in the bottom panel are not covered and
that cooling air flow is not restricted.
Tools Required
• A medium-sized flat-bladed screwdriver, 1/4" wide or narrower.
• Needle-nosed pliers
The Procedure
1. Make sure that the power cord and all other cords are disconnected from the
unit.
2. Carefully place the unit upside-down on a flat surface, such as the kitchen table
with a clean and dry towel on it.
3. Remove the adhesive non-slip grips from the bottom of each foot.
4. Identify the four locking tabs securing the foot to the chassis. The photo of a
removed foot shows the details of the locking tabs.
Appendix a
