25
Navigating the Setup Menus
Concert XR series
DTS Dialog Control - Sets the level the for dialog channel in DTS audio
streams.
Maximum Volume - Limits the highest volume that will play in the main zone.
This is useful if you have speakers, amplifiers, or neighbors, with limited power
handling abilities.
Max On Volume - This is the highest volume that the unit will play when it
is first switched on. This prevents the unit from being turned on at shocking
volume levels from the last time you were watching a good movie.
Display On Time - This sets the amount of time the display is lit after a
command has been initiated.
Control - The front panel and IR control are always active. This control setting
defines the 3rd option for controlling your unit. You may select between RS232
or IP control if you have an automated control system. Default setting is IP.
Power On - This setting defines the state of your XR series once the Mains
Power switch has been turned off or if there was a power outage where power
turns off and then back on again. You have 3 options in this setting:
Last State - where the unit returns to the last On or Standby state before
power was lost or the Main power switch was turned to off.
Standby - where the unit comes up to Standby once power has returned
On - where the unit turns on completely once power has been restored
Standby Mode - This setting defines the standby mode.
Low Power - The unit’s power consumption in standby is at minimum.
IP and HDMI ON - Allows IP control and HDMI bypass during standby
(but more power consumption in standby).
Language - The OSD menu language can be selected from English, German,
French, Spanish, Dutch, Russian, and Chinese.
