20
Navigating the Set-Up Menus
O
Input Config
General Setup
Speaker Types
Speaker Distances
Speaker Levels
Video Inputs
HDMI Settings
Zone Settings
Network
Bluetooth
Concert XR series
12V Trigger Connections
The Concert XR series has two rear-panel 12 volt trigger outputs that can be
used to remotely trigger such things as external power amplifier turn-on,
projector power on, and screen automation. Each external device must have
12 volt triggering capability for this to work. The jacks are designed for 3.5
mm mono connectors with “Tip” being the 12 volt trigger output and “Sleeve”
being ground. Each jack is capable of outputting a 12 volt, 70 mA switching
signal. This not to be used for any other purpose such as jump starting the old
car on a frosty morning.
Setup Menus
This section of the manual discusses how to navigate the set-up menus of your
Concert XR series Immersive AV Receiver. As you have probably determined
by now, if you have the read the rest of this manual, the Concert XR series
is an incredibly flexible and sophisticated processor that you can literally
“personalize” for use with your performance theater system. While the set-up
menus incorporate a number of default settings that we determined will work
well with many theater systems, you will want to take the time to go through
each of these set-up screens and make the appropriate adjustments to the
settings. Once you have made the changes, you will not have to change these
again unless you make equipment or usage settings to your system.
Front panel display: Main Menu
