AudioControl 7.1 Channel THX Ultra 2 Theater Processor, Manual

Page: 32 / 78

Maestro
tm
Phone 425-775-8461 • Fax 425-778-3166
®
Configuration
Section
3-8
ASA Sur ASA Sur
ASA Sur ASA Sur ASA SurrBack L/R
rBack L/R
rBack L/R rBack L/R rBack L/R – Advanced Speaker Array: This sets the
distance between the Surround Back speakers to ensure
proper soundstage imaging. It is preferable to put these
speakers within 48” of each other on the back wall. If this is
not practical and they must be further than 48” apart, set
this option to 48+ In
48+ In
48+ In 48+ In 48+ In setting.
Advanced Setup Menus
ADV 1 – Speaker Equalization
Channel Equalization Channel Equalization Channel Equalization Channel Equalization Channel Equalization – While we strongly recommend the
use of a good equalizer such as our Diva to get the best
performance from a home theater system, we realize that not
everybody is that committed to great sound (or they believe
in that evil story that has been passed down over the genera-
tions that all equalizers are bad). For simple tone control, we
have included Bass and Treble adjustments on the Maestro.
A A A A Auto Stereo T uto Stereo T uto Stereo T uto Stereo T uto Stereo Tone Bypass one Bypass one Bypass one Bypass one Bypass – Set this option to Y Y Y Y Yes es es es es to auto-
matically defeat the above tone control settings when in the
Stereo music mode.
ADV 2 – Video Settings
OSD OSD OSD OSD OSD – Controls the display of the On-Screen Display.
On On On On On: All volume control, source selection and setting op-
tions are displayed on the main video outputs.
Off Off
Off Off Off: Only the Main and Setup menus are displayed.
Assigning Composite and S- Assigning Composite and S-
Assigning Composite and S- Assigning Composite and S- Assigning Composite and S-V
V
V V Video Inputs
ideo Inputs
ideo Inputs ideo Inputs ideo Inputs – Just because a
video input on the back of the Maestro says “Tape”, that
doesn’t mean that you’re stuck just using it for the cassette
tape deck. Four of the source inputs have assignable video
inputs: Aux, CD, Tuner and DVD-A (Multi-Channel). Each of
these audio inputs can be assigned to the following compos-
ite and S-video inputs: None, DVD, SAT, AV, Tape, or VCR.
A A A A Audio and V udio and V udio and V udio and V udio and Video T ideo T ideo T ideo T ideo Tracking racking racking racking racking – Set this option to T T T T Track rack rack rack racked ed ed ed ed for
normal operation where the Video input selection is the
same as the assigned Audio input selection. If set to Sepa-
Sepa- Sepa- Sepa- Sepa-
rate rate rate rate rate, the Video input will remain on the same selection
regardless of the Audio input source selection.
Simulcast Listening: Simulcast Listening: Simulcast Listening: Simulcast Listening: Simulcast Listening: Even when the Audio and Video Track-
ing option is set to T
T
T T
Track rack
rack rack
racked ed
ed ed
ed, it is possible to listen and watch
Adv 1 - Speaker EQ
Bass Treble
FL: --I-- +0dB --I-- +0dB
C: --I-- +0dB --I-- +0dB
FR: --I-- +0dB --I-- +0dB
SR: --I-- +0dB --I-- +0dB
SBR: --I-- +0dB --I-- +0dB
SBL: --I-- +0dB --I-- +0dB
SL: --I-- +0dB --I-- +0dB
Auto Stereo Tone Bypass: Yes
Adv 2 - Video Settings
OSD On
Video Input Aux: None
Video Input CD: None
Video Input Tuner:None
Video Input DVD-A:None
Audio and Video: Tracked
HQ Vid 1 Comp/RGB: None
HQ Vid 2 Comp/RGB: None
HQ Vid 3 Comp/RGB: None