AudioControl 7.1 Channel THX Ultra 2 Theater Processor, Manual

Page: 33 / 78

Maestro
tm
Phone 425-775-8461 • Fax 425-778-3166
®
Configuration
Section
3-9
two separate sources (i.e. Watch the TV and listen to the
Radio Tuner). Refer to page 4-2 for more information.
Assigning Component V Assigning Component V Assigning Component V Assigning Component V Assigning Component Video Inputs ideo Inputs ideo Inputs ideo Inputs ideo Inputs – The HQ V HQ V HQ V HQ V HQ Vid id id id id op-
tions select which source units will be using the Compo-
nent Video inputs. Select the source input you want asso-
ciated with each of the component video inputs.
ADV 3 – Digital Settings
Assigning the Digital A Assigning the Digital A Assigning the Digital A Assigning the Digital A Assigning the Digital Audio inputs udio inputs udio inputs udio inputs udio inputs – The Digital Audio
inputs on the Maestro are fully assignable. Any digital
input can be assigned to any source selection. Only one
source can be assigned to a digital input. When planning
your installation in the Installation Questionnaire at the
beginning of this manual you should have noted whether
each source unit has a Coaxial Digital, Optical Digital or No
digital output. If the output of a source unit doesn’t match
the input preassigned on the Maestro (i.e. The satellite
tuner has a Coaxial output instead of an Optical output),
simply change the input assignments in this menu.
ADV 4 – Zone 2 Settings
Max V Max V Max V Max V Max Volume olume olume olume olume – This works just like the Main Zone maxi-
mum volume setting back in the basic menus. It limits the
maximum volume control setting for the Zone 2 output.
F FF FFix ix ix ix ixed V ed V ed V ed V ed Volume olume olume olume olume – If you are using the Zone 2 output from
the Maestro to feed into another stereo receiver in the
remote zone, you will want to set this option to Yes. This
provides a constant signal level so you can use the volume
control on the receiver in the second zone to control it’s
volume. Install Hint: Set the desired output volume level
for Zone 2 with the volume control befor
befor befor befor beforeeeee setting this
option to on. The Maestro locks the Zone 2 output at the
current volume setting when this option is set to on.
Max. On V Max. On V Max. On V Max. On V Max. On Volume olume olume olume olume – Sets the maximum volume that the
zone 2 output will play when the power is turned on.
Zone 1 Standby Zone 1 Standby
Zone 1 Standby Zone 1 Standby Zone 1 Standby – Sets if Zone 1 can put both Zone 1 and
2 into Standby or only the Local Zone 1.
Zone 2 Standby Zone 2 Standby Zone 2 Standby Zone 2 Standby Zone 2 Standby – Sets if Zone 2 can put both Zone 1 and
2 into Standby or only the Local Zone 2.
Install Hint: Install Hint: Install Hint: Install Hint: Install Hint: Only
one source assignment
is allowed per input, you
may have to set the input
option to “No Button No Button No Button No Button No Button” in order
to free that digital input for
another source.
Adv 3 - Digital Settings
Coaxial Inputs
DVD input: DVD button
AV input: AV button
Tape input: Tape button
Tuner input: Tuner button
CD input: CD button
Optical Inputs
VCR input: VCR button
Sat input: Sat button
Adv 4 - Zone 2 Settings
Max Vol 20-72: 72
Fix Vol: No
Max on Vol 0-72: 20
Zone 1 Standby: Local Only
Zone 2 Standby: Local Only
Local OSD: On
Zone 1 Control: Yes
Access: All