AudioCodes MediaPack MP-201B, User Manual, Page: 79 / 270

Version 3.0.1 79 July 2010
MP-20x Telephone Adapter 8. Quality of Service (QoS)
Figure 8-7: QoS - Add Traffic Priority Rule
Table 8-3: Add Traf fi c Priority Rule - Parameter Descriptions
Parameter Description
Source Address The source address of the packets sent to or received from the network
object. From the drop-down list choose 'Any', 'User Defined' or the host.
Destination Address The destination address of the packets sent to or received from the network
object. This address can be con
fi gured in the same manner as the source
address. From the drop-down list choose 'Any', 'User Defined' or the host.
Protocol From the drop-down list, choose a speci fi c traf fi c protocol, or add a new
one by choosing 'User Defined'; the screen 'Edit Service' opens. Click the
icon 'new' under the column 'Action'; this commences a sequence that adds
a new protocol.
QoS Operation In this screen section, set a Quality of Service working method. Check
parameter 'Set Priority' or 'Set DSCP' (refer to the descriptions below).
Set Priority Check this check box to add a priority to the rule; the screen 'Edit Service'
opens, allowing you to select between one of eight priority levels, 0 =
lowest and 7 = highest (each priority level is mapped to low/medium/high
priority). This sets the priority of a packet on the connection matching the
rule, while routing the packet.