AudioCodes MediaPack MP-201B, User Manual, Page: 151 / 270

Version 3.0.1 151 July 2010
MP-20x Telephone Adapter 12. Remote MP-20x Telephone Adapter Management
12 Remote MP-20x Telephone Adapter
Management
MP-20x was designed to be mass-deployed by carriers and service providers. One of the
keys to guarantee end-user satisfaction and true toll-quality service in mass field
deployment is comprehensive remote configuration and management capabilities:
„ Automatic and remote configuration updates
„ Automatic and remote firmware updates
„ Remote diagnosis of problems reported by the user
„ Remote collection of statistical information regarding the quality of the service
„ Remote notifications of problems in the service
12.1 Overview
12.1.1 Remote Configuration
By default, MP-20x is provided with factory default settings, which are common to all MP-
20x devices (except for the MAC address). The factory settings allow the user to connect to
MP-20x's embedded Web server from the LAN interface.
By default, the WAN interface is configured for DHCP (i.e., automatically obtains its IP
address from a DHCP server). In the case of PPPoE or other Internet dialers, this default
configuration does not allow MP-20x to connect to the Internet. The default configuration
does not include any VoIP service provider settings (such as a SIP proxy).
In some cases, AudioCodes can ship MP-20x devices that are pre-configured with some
customer-specific parameters. This set of parameters is usually defined as the new "factory
settings" for this specific customer.
MP-20x's factory default settings and the current configuration running on MP-20x are
stored on MP-20x's non-volatile flash memory. The current configuration can be remotely
updated using several configuration interfaces:
„ HTTP-based Web server
„ SNMP
„ TR-069
„ Configuration file upload/download