manualshive.com logo in svg

AudioCodes MediaPack MP-201B, User Manual, Page: 135 / 270

Share
Download
AudioCodes MediaPack MP-201B User Manual Download Page 135

Version 3.0.1 

135 

July 2010 

MP-20x Telephone Adapter 

 

11. VLAN and Bridge Settings 

 

11.1.5.1.5  Testing the 3-VLAN Setup 

¾

 

To test the 3-VLAN setup: 

1. 

Place a VOIP call. Verify that the VOIP is using 802.1q/p, that the VLAN ID is 300 and 
that the IP is 3.3.x.x (refer to the screen shown below).  

Figure 

 

11-20: Testing the Setup 

 

2. 

Connect a PC to the LAN port of MP202 (1 or 2) and send traffic (ICMP). Verify that 
the ICMP traffic is tagged (802.1q) and that it is using VLAN 521. 

Figure 

 

11-21: Testing the Setup 

 

3. 

Connect the management PC to VLAN 311 and verify that all management traffic is 
carried in this VLAN. 

Figure 

 

11-22: Testing the Setup 

 

Summary of Contents for MediaPack MP-201B















































































































































































































































































Reviews:

No comments