manualshive.com logo in svg

AudioCodes MediaPack MP-201B, User Manual, Page: 59 / 270

Share
Download
AudioCodes MediaPack MP-201B User Manual Download Page 59

Version 3.0.1 

59 

July 2010 

MP-20x Telephone Adapter 

 

5. Configuring VoIP Parameters 

 

Parameter 

Description 

Advanced Line Parameters

 

Line Voice Volume 

The voice volume of line (the gain from the network towards the local 
phone). Default = 0 dB. 

Enable Supplementary 
Services

 

If it is checked, the supplementary services are enabled on this line. One 
can enable/disable the supplementary services per line. 

Enable Automatic 
Dialing

 

If it is checked, the Automatic Dialing feature is enabled, which allows a 
user-defined (see below) phone number to be automatically dialed when 
the line is off-hooked. 

Automatic Dialing 
Timeout

 

Automatic dialing is activated only after this defined time and if the user has 
not started dialing before this timeout. 

Automatic Dialing 
Destination

 

The destination that is automatically dialed. This can be a phone number or 
a domain name (for example, [email protected] or user@domain name). 

 

 

Summary of Contents for MediaPack MP-201B















































































































































































































































































Reviews:

No comments