AudioCodes MediaPack MP-201B, User Manual, Page: 203 / 270

Version 3.0.1 203 July 2010
MP-20x Telephone Adapter 13. Security
„ Spoofing protection - a packet from the WAN with a source IP of the LAN has been
blocked.
„ DMZ network packet - a packet from a demilitarized zone network has been blocked.
„ Trusted device - a packet from a trusted device has been accepted.
„ Default policy - a packet has been accepted/blocked according to the default policy.
„ Remote administration - a packet designated for OpenRG management has been
accepted/blocked.
„ Access control - a packet has been accepted/blocked according to an access control
rule.
„ Parental control - a packet has been blocked according to a parental control rule.
„ NAT out failed - NAT failed for this packet.
„ DHCP request - OpenRG sent a DHCP request (depends on the distribution).
„ DHCP response - OpenRG received a DHCP response (depends on the distribution).
„ DHCP relay agent - a DHCP relay packet has been received (depends on the
distribution).
„ IGMP packet - an IGMP packet has been accepted.
„ Multicast IGMP connection - a multicast packet has been accepted.
„
RIP packet - a RIP packet has been accepted.
„ PPTP connection - a packet inquiring whether OpenRG is ready to receive a PPTP
connection has been accepted.
„ Kerberos key management 1293 - security related, for future use.
„ Kerberos 88 - for future use.
„ AUTH:113 request - an outbound packet for AUTH protocol has been accepted (for
maximum security level).
„ Packet-Cable - for future use.
„ IPV6 over IPV4 - an IPv6 over IPv4 packet has been accepted.
„
ARP - an ARP packet has been accepted.
„ PPP Discover - a PPP discover packet has been accepted.
„
PPP Session - a PPP session packet has been accepted.
„ 802.1Q - a 802.1Q (VLAN) packet has been accepted.
„
Outbound Auth1X - an outbound Auth1X packet has been accepted.
„ IP Version 6 - an IPv6 packet has been accepted.
„
OpenRG initiated traffic - all traffic that OpenRG initiates is recorded.
„ Maximum security enabled service - a packet has been accepted because it belongs
to a permitted service in the maximum security level.
„ SynCookies Protection - a SynCookies packet has been blocked.
„ ICMP Flood Protection - a packet has been blocked, stopping an ICMP flood.