Configuration Note
2. Setting Up FXS Lines on MP-1xx
Version 3.0
15
February 2013
2.7
Configuring Port Authentication
The procedure below describes how to configure Port Authentication.
To set port authentication:
1.
Click
Configuration
>
VoIP
>
GW and IP to IP
>
Analog Gateway >
Authentication
; the Authentication page opens.
Figure 2-7: Authentication
2.
For each of the FXS ports do the following:
•
In the
User Name
field, enter the User Name in the SPS that you want to assign
to this FXS port.
Note:
The user name is case sensitive and must be the same as the user name that
was created in the SPS Admin.
•
In the
Password
field, type the SIP Password that was defined in the SPS.
3.
Click
Submit
.
2