AudioCodes MediaPack MP-1 Series, Configuration Note

Page: 12 / 18

Setting Up FXS Lines on MP-1xx for SPS
Configuration Note 12 Document#: LTRT-31325
2.4 Assigning User Name to FXS Port
The procedure below describes how to assign a User Name to the FXS Port.

To assign user name to FXS port:
1. Click Configuration > VoIP > GW and IP to IP > Hunt Group > Endpoint Phone
Number ; the Endpoint Phone Number Table page opens.
Figure 2-4: Endpoint Phone Number Table
2. For each FXS line, do the following.
•
In the 'Channel(s)' field, enter the FXS port number.
•
In the 'Phone Number' field, enter the User Name in the SPS that you want to
assign to this FXS port.
3. Click Submit .
2