Setting Up FXS Lines on MP-1xx for SPS
Configuration Note
14
Document#: LTRT-31325
2.6
Configuring IP to Hunt Group Routing
The procedure below describes how to configure IP to Hunt Group Routing.
To configure IP to Hunt group routing:
1.
Click
Configuration
>
VoIP
>
GW and IP to IP
>
Routing > IP to Trunk Group
Routing
; the IP to Hunt Group Routing Table page opens.
Figure 2-6: IP to Hunt Group Routing Table
2.
From the
IP to Tel Routing Mode
drop-down list, select
Route calls before
manipulation
.
3.
In the 'Dest Phone Prefix' field, enter "
*
".
4.
In the 'Hunt Group ID'
field, enter "1".
5.
In the 'IP Profile ID'
field, enter "0".
6.
In the 'Source IPGroup ID'
field, enter "-1".
7.
Click
Submit
.
2
3
4
5
6
