CHAPTER 2 SNMP Overview
Mediant 800 SBC | SNMP Reference Guide
■
System MIB (under MIB-2):
Standard system group: sysDescr, sysObjectID, sysUpTime,
sysContact, sysName, sysLocation, and sysServices. You can replace the value of
sysObjectID.0 with a variable value using the ini file parameter SNMPSysOid. This
parameter is polled during startup and overwrites the standard sysObjectID.
SNMPSysName is an administratively assigned name for this managed node. By
convention, this is the node's fully-qualified domain name (FQDN). If the name is
unknown, the value is the zero-length string. If the [HostName] ini file parameter is
configured, its' value overwrites the value of SNMPSysName.
■
RTP MIB:
The MIB is supported according to RFC 2959. It contains objects relevant to the
RTP streams generated and terminated by the device and to the RTCP information related
to these streams.
The inverse tables are not supported.
■
Notification Log MIB:
Standard MIB (RFC 3014 - iso.org.dod.internet.mgmt.mib-2)
supported for implementation of Carrier Grade Alarms.
■
Alarm MIB:
IETF MIB (RFC 3877) Supported as part of the implementation of Carrier Grade
Alarms.
■
SNMP Target MIB:
(RFC 2273) Allows for configuration of trap destinations and trusted
managers.
■
SNMP MIB:
(RFC 3418) Allows support for the coldStart and authenticationFailure traps.
■
SNMP Framework MIB:
(RFC 3411).
■
SNMP Usm MIB:
(RFC 3414) Implements the user-based Security Model.
■
SNMP Vacm MIB:
(RFC 3415) Implements the view-based Access Control Model.
■
SNMP Community MIB:
(RFC 3584) Implements community string management.
■
ipForward MIB:
(RFC 2096) Fully supported.
■
RTCP-XR:
(RFC) implements the following partial support:
●
The rtcpXrCallQualityTable is fully supported.
●
In the rtcpXrHistoryTable, support of the RCQ objects is provided only with no more
than 3 intervals, 15 minutes long each.
●
Supports the rtcpXrVoipThresholdViolation trap.
■
ds1 MIB:
supports the following:
●
dsx1ConfigTable: partially supports the following objects with SET and GET applied:
◆
dsx1LineCoding
◆
dsx1LoopbackConfig
◆
dsx1LineStatusChangeTrapEnable
◆
dsx1CircuitIdentifier
- 5 -