Survivable Branch Appliance
AudioCodes Enhanced Media Gateway
44
Document #: LTRT-18206
3.1.2.1.2 Data-Routing LAN Interface
The default IP address of the LAN data-routing interface is listed in the table below:
Table
3-3: Default LAN Data-Routing IP Address
Parameter
Default Value
IP Address
192.168.0.1
Subnet Mask
255.255.255.0
Default Gateway
0.0.0.0
Note:
The data-routing interface must be in the same subnet as the VoIP and
Management interface.
¾
To define the device's LAN data-routing IP address:
1.
Access the device's Web interface with the IP address that you assigned to the VoIP and
Management interface (refer to “VoIP and Management LAN Interface” on page
).
2.
Access the 'Connections' page (
Configuration
tab >
Data Settings
menu >
Data System
>
Connections
).
Figure
3-4: Connections Page
3.
Click the "LAN Switch VLAN 1" connection, and then click the
Settings
tab.
4.
In the 'IP Address' and 'Subnet Mask' fields, enter the required IP address (e.g., 10.8.6.85)
and subnet respectively, and then click
OK
.
Figure
3-5: Defining LAN Data-Routing IP Address
