AudioCodes Mediant 1000, Installation Manual

Page: 43 / 62

Version 5.8 43 June 2009
Installation Manual 3. Configuring the Device
b. Assign telephone numbers to the following interfaces:
♦ FXS (only SIP): In the 'Module' column, select 'Module 3 FXS', enter 1-4
(i.e., channels 1 through 4) in the ‘Channel(s)’ column, and then in the
'Phone Number' column, enter the phone number (e.g., 101) for the first
channel. Phone numbers 102, 103, and 104 are sequentially assigned to
subsequent channels (i.e., 2 through 4).
♦ FXO (only SIP): In the 'Module' column, select 'Module 5 FXO', enter 1-4
(i.e., channels 1 through 4) in the ‘Channel(s)’ column, enter the phone
number (e.g., 201) for the first channel in the 'Phone Number' column, and
then enter 1 in the 'Trunk Group ID' column. Phone numbers 202, 203, and
204 are sequentially assigned to subsequent channels (i.e., 2 through 4).
♦ PRI: In the 'Module' column, select 'Module 1 PRI', select 1 (i.e., trunk 1) in
the ‘From Trunk' and 'To Trunk' columns, enter 1-30 (i.e., channels 1 through
30) in the ‘Channel(s)’ column, enter the phone number (e.g., 11000) for the
first channel in the 'Phone Number' column, and then enter 2 in the 'Trunk
Group ID' column. Phone numbers 11001, 11002, 11003 and so on are
sequentially assigned to subsequent channels (i.e., 2 through 30).
♦ BRI: In the 'Module' column, select 'Module 2 BRI', select 2 (i.e., trunk 2) in
the ‘From Trunk' and 'To Trunk' columns, enter 1-2 (i.e., channels 1 through
2) in the ‘Channel(s)’ column, enter the phone number (e.g., 22000) for the
first channel in the 'Phone Number' column, and then enter 3 in the 'Trunk
Group ID' column. Phone number 22001 is automatically assigned to the
subsequent channel (i.e., 2).
c. Click Submit .
2. Configure routing of telephone calls (i.e., Tel or inbound IP) to an IP destination (i.e.,
IP address):
a. Open the ‘Tel to IP Routing’ page ( Configuration tab > Protocol Configuration
menu > Routing Tables submenu > Tel to IP Routing ).
Figure 3-4: Routing Tel Calls to an IP Address in Tel to IP Routing Page
b. In the 'Src. Trunk Group ID' column, enter the Trunk Group number as defined in
Step 1.
c. In the 'Dest. Phone Prefix' column, enter "10" (i.e., prefix of dialed number).
d. In the 'Source Phone Prefix' column, enter the prefix of the channel's telephone
number as defined in Step 1.
e. In the 'Dest. IP Address' column, enter 10.33.24.14 (i.e., calls are sent to this IP
address).
f. Click Submit .
Therefore, any call whose dialed number prefix matches the value in the 'Dest. Phone
Prefix’ column (i.e., 10) and whose source phone number prefix matches the value in
the ‘Source Phone Prefix‘ column is sent to the IP address defined in the ‘Dest. IP
Address’ column.