- 8 -
CATC/2WSI Installation and Connection Guide
- 8 -
Troubleshooting
Symptom
Possible Cause
Solution
No Feedback on CATC
No Power on CATC/2WSI
Check Power LED and Phoenix
connections.
Incorrect Dipswitch Settings for
Device Type
Check Dipswitch setting for device
type
Incorrect dipswitch setting for
Interface Address
Check CATC program and
CATC/2WSI dipswitch setting and
check for correct setting. They should
match.
No Interface Address is set in CATC
programming
Set Interface Address action should
be added to the button actions used
to GOTO the control screens.
RS232 send and receive are reversed
Use JP1 and JP2 to reverse
No feedback from iPod
iPod not connected properly in the
dock
Remove the iPod from the dock,
unlock and re-insert.
No “OK to Disconnect” on iPod screen
Remove the iPod from the dock,
unlock and re-insert.
No feedback from Escient Fireball
Escient has stopped and needs
restart
Remove JP2 jumper first on
CATC/2WSI, then power cycle Escient
and restart
No feedback from Multizone Request
Audio server
Interface address not set for discreet
output.
In the Set Interface Address action,
IA1 matches the dipswitch setting
and IA2 matches the discreet output
of the ReQuest
No feedback from any output of
ReQuest Server
ReQuest is in standby
Make sure unit is powered on or add
power on commands to PX-700
Source Events
No feedback from Russound ST2
tuner
Interface address not set for discreet
output.
In the Set Interface Address action,
IA1 matches the dipswitch setting
and IA2 matches the discreet output
of the ST2. In AM/FM & XM units, XM
is output 1 and AM/FM is output 2.
Audioaccess
250 Crossways Park Drive
Woodbury, NY 11797
www.audioaccess.com
www.support.audioaccess.com
E-mail:
516.496.3400
888.691.4171
FAX: 516.682.3510
©2006 Harman International Industries, Incorporated. All rights reserved.
Audioaccess & Harman International are registered trade marks of Harman International Industries, Incorporated.
Apple and iPod are registered trademarks of Apple Computer, Inc.
