Matrix Settings
20
1.
Matrix Figure:
Right-click on the point, to select the matrix connect or
disconnect
Green color represents connection; pink color represents no connection
Left-click on one of the squares, to adjust the sending level on the matrix
Sending level range is -80 to 0 dB (0.1 dB stepping)
When lower the sending level, the color of the squares will lighten
gradually to white color at 0 dB
2.
There are 4 select buttons next to the Master Matrix block
a. Connect all:
when click on this button, all input channels are
connected to all output channels
b. Disconnect all:
when click on this button, all input channels are
disconnected to all output channels; there is no output
c. Diagonal:
when click on this button, each input channel is only
connect to one respective output channel
d. Copy:
this button is for 2 or more units linking together
• when 2 or more units,
the Matrix Mixer
Settings window will
have additional matrix
block that mark as
Slave input block linking
to Master outputs, as
show below
• Click the Copy button, the
following window will display
to allow selection any of the
connecting unit copy to other
connecting unit within the
linking system
• Click the Slave Output
bar will display the
output connection
within its own slave
unit and from the slave
unit or units connecting
below
①
Double-click “Mixer” block, the following window will be displayed
