Double-click “Equalizer” block,
3 Band EQ will display the following window
Operations Blocks’ Descriptions
●
3 Band Equalizer Settings
10
1.
Unit name and Channel No:
The unit name and channel number to
which this block is set will be displayed
2.
Band:
Click and select the band to adjust;
• 3 band EQ has Band 1 (100 Hz), Band 2 (500 Hz) and Band 3 (2500
Hz)
3.
Equalizer type:
Click and select the equalizer type;
• Low Shelving
• High Shelving
• Notch
• Bell (default)
4.
Frequency:
To select the center frequency (Hz) for the current band;
range is from 20 Hz to 20 kHz (1 Hz stepping)
5.
Gain:
To adjust the amount of boost or cut applied at the center
frequency for the current band from 9 to -27 dB (0.1 dB stepping);
default at 0 dB
6.
Quality:
Q or Quality factor, selects the ratio of the center frequency
divided by the bandwidth. Q reflects an inverse relationship to the
bandwidth, and adjust from 0.01 to 50.00 (0.01 stepping); default at 0.50
7.
Bypass:
When selected, it will bypass this filter
8.
Quality dot:
Q factor dot
9.
Frequency square:
These settings may be adjusted by dragging the
band controls shown inside the graph
①
②
③
④
⑤
⑥
⑦
⑧ ⑨
