Mains
The CDT-Six / Force is equipped with a single IEC mains input socket,
located on the right hand side of rear panel of the Force Power
Supply, when the unit is viewed from behind. Combined with this input
socket is the main power switch, and this is used to turn on and off
BOTH units.
Once all of the umbilical cables have been correctly connected, use
the supplied mains cable to connect the Force Power Supply to the
local mains supply. Make sure the power switch is in the ‘OFF’
position before connecting the mains cable to the unit or the local
mains supply.
The mains fuse is located inside the unit; in the event that this needs
to be changed, please consult your Audio Note (UK) Dealer, who will
be happy to assist you. Alternatively, feel free to contact us directly.
Once all the connections are completed and checked, ensure that the volume control
on your preamplifier / integrated amplifier is at the minimum setting.
Ensure that any following equipment connected to the CDT-Six / Force (DAC,
preamplifier, power amplifiers etc) is switched OFF
. Source components should
always be the
FIRST
components to be switched on and the
LAST
components to
be switched off.
The above procedure minimizes the possibility of loud noises produced by
components at switch on being passed to the loudspeakers and possibly causing
damage.
CONNECTION OVERVIEW continued…
IEC MAINS INPUT
MAINS SWITCH
