Turn on the CDT-Six / Force by using the rocker switch located on the rear panel of
the Force Power Supply, above the mains inlet IEC socket. The red ‘power on’
indicator LED located on the front panel should now be illuminated, and the screen
located on the front of the CDT-Six should light up.
Turn on your DAC, pre amplifier / power amplifier / integrated amplifier. If you are
using a pre / power combination, always turn on the pre amplifier BEFORE the power
amplifier(s).
You are now ready to play a disc and enjoy some music!
Please open the sliding disc cover on the top of the CDT-Six. Put the disc on the
spindle and secure it with the supplied disc clamp. Close the disc cover.
CAUTION: - THE DISC CLAMP SHOULD NOT BE PLACED ON TO THE SPINDLE
WITHOUT A CD IN POSITION, AS THE CLAMP CAN BECOME TRAPPED IN
PLACE. FORCED REMOVAL CAN RESULT IN DAMAGE TO THE DISC READING
MECHANISM.
CONNECTION OVERVIEW continued…
LOADING THE DISC
