Programming track playback: -
You may select a number of tracks and store them in the memory in the desired
sequence. The player will then play back only your selection of tracks in the
selected order.
1
Press the
MEMORY
button. 'MEMORY' will appear on the display.
2
Press the
CD SKIP
or numbered buttons to select the desired track to
be stored.
3
Press the
MEMORY
button. The track is now stored in the memory.
Repeat steps 2 and 3 to complete programming.
4
Press
PLAY
to listen to the programmed tracks.
5
Press
STOP
once to stop playback.
6
Press
STOP
second time to clear programming.
A maximum of 32 tracks may be stored.
A particular track in your selection may be replaced with a new one if the original
selection was made in error. Simply store the new track in the program number to be
replaced.
NOTE: Programming may not be made during playback.
TIME
Press this button to see the elapsing or remaining time of the CD (Play
mode only). Press the
TIME
button and select the desired TIME
DISPLAY for CD playback.
Each time this button is pressed, selection is as follows:
"EACH REMAIN" the elapsed playing time for the current track
"TOTAL"
the total elapsed playing time
"TOTAL REMAIN"
the remaining playing time for the current track
REPEAT
Press this button to listen to the music repeatedly. Press once to
repeat the entire disc. Press twice to repeat the track being played.
RANDOM
Press this button for random order playback.
NUMBERS
A particular track may be selected for playback by using these
buttons. Example:
To play track No. 3, press the button “3” once.
To play track No. 14, press the buttons “1” and “4” in succession.
To play track No. 20, press the buttons “2” and “0” in succession.
DISPLAY
Press this button to change the intensity of display or to turn it on/off.
Press the
DISPLAY
button once to reduce the intensity of the display.
Press the
DISPLAY
button twice to turn the display off. To turn the
display on, please press
DISPLAY
button once again.
OPERATION continued…
