Please take care when unpacking your
CDT-Six / Force Transport and power supply.
Choose a clean, clear location to unpack the units. Be aware that the Transport and
power supply are very heavy; before attempting to unpack or lift the units, check their
weight and if necessary use more than one person so that they can be moved safely
and easily.
We recommend that you retain and carefully store all of the original packing
materials, in case transportation / shipping is required at a later date.
Select a suitable location for the units. This should be a dry, dust free and level area,
preferably shielded from direct sunlight and free from vibration. Also ensure that the
location is stable and capable of carrying the weight of the units.
A suitable mains power outlet must be close to the location; power cords must not be
pulled or stretched tightly in an attempt to reach a wall socket. If the power cord will
not easily reach the socket, choose a closer location!
Please ensure that adequate ventilation for the unit is provided, and that airflow
through any ventilation slots in the unit is not restricted. We recommend a distance of
at least 30cm free space is maintained above the Transport and at least 20cm above
the power supply, and preferably they should be sited in free space or on the top
shelf of your equipment rack or table. Please also remember that valve equipment
operates at extremely high temperatures, so a position that is inaccessible to any
children or animals is essential.
FIRSTLY, ENSURE THAT THE POWER SUPPLY
IS NOT CONNECTED TO A
MAINS ELECTRICAL SUPPLY,
AND THAT THE POWER CORD
IS NOT
CONNECTED TO THE POWER SUPPLY.
Please remove 2 transit screws and the plastic plate, located on the top of the CD
loading area of the
CDT Six
and marked with yellow washers, to release the sprung
sub-chassis.
UNPACKING AND INSTALLATION
