7
FRONT PANEL
1)
Main voltage switch
2)
SEARCH UP or DOWN / SELECT - STANDBY [Knob / Switch]:
Clockwise rotation: (SEARCH UP). When the knob is rotated clockwise, the frequency is increased by one step (SEARCH function). This
function is active just in Tuner mode.
Anti-clockwise rotation: (SEARCH DOWN). When this knob is rotated anti-clockwise the frequency is decreased by one step (SEARCH
function). This function is active just in Tuner mode.
Push (SELECT): One press and release of the knob switches between TUNER or USBDAC mode.
Push (STANDBY): Keeping this button pushed for some seconds puts the unit in Stand By mode. In Stand By mode the Trigger Out
signal is set to zero, so if a unit is connected via the Trigger Out it is switched off. (STANDBY MODE)
3)
STORE /
STOP: multifunction key, the function depends on the mode the unit is working in: Tuner or USBDAC.
TUNER mode (STORE):
Pressing this button puts the unit in “Storage” mode and is possible to permanently store the current radio station
in the unit’s memory. It is possible to store up to 18 AM and 18 FM stations. Please refer to the “Radio stations storage” paragraph for
further details about storage procedure.
USBDAC mode (
STOP): During playback Stops track playback (the
availability of this function depends on the software player used)
4)
PREV TRACK /
MEMORY DOWN: multifunction key, the function depends on the mode the unit is working in: Tuner or USBDAC
TUNER mode (
MEMORY DOWN): Pressing this button when the unit is in normal mode tunes the radio on the station stored in the
memory allocation that precedes the last selected allocation. When the unit exits the Standby mode and when changing modulation type,
pressing this button tunes the radio on the station stored in the 18th memory allocation. Pressing the button again tunes the radio on the
station n° 17, 16,…, 1 then back to n° 18. If no radio station is stored into the selected allocation, an EMPTY signal shows on the display
and the radio switches back to the previous station. When in “Storage” mode, pressing this button allows you to choose the memory
allocation where you would like to store the selected radio station. Please refer to “Radio stations storage” paragraph for further details
about storage procedure. Please refer to “Stored Radio stations tuning” paragraph for further details about radio station tuning.
USBDAC mode (
PREVIOUS TRACK): During playback, starts previous track playback on your play list, when playback is stopped it
allows you to choose the previous track on your play list. (the availability of this function depends on the software player used).
5)
NEXT TRACK /
MEMORY UP: multifunction key, the function depends on the mode the unit is working in: Tuner or USBDAC
TUNER mode (
MEMORY UP): Pressing this button when the unit is in normal mode tunes the radio on the station stored in the memory
allocation that follows the last selected allocation. When the unit exits the Standby mode and when changing modulation type, pressing this
button tunes the radio to the station stored in the 1st memory allocation. Pressing the button again tunes the radio on the station n° 2, 3,…,
18 then back to n° 1. If no radio station is stored on the selected allocation, an EMPTY signal shows on the display and the radio switches
back to the previous station. When in “Storage” mode, pressing this button allows you to choose the memory allocation where to store the
selected radio station. Please refer to “Radio stations storage” paragraph for further details about storage procedure. Please refer to
“Stored Radio stations tuning” paragraph for further details about radio stations tuning.
USBDAC mode (
NEXT TRACK): During playback, starts next track playback on your play list, when playback is stopped it allows you to
choose the next track on your play list. (the availability of this function depends on the software player used)
6)
AM/FM
/
►
PLAY/PAUSE: multifunction key, the function depends on the mode the unit is working in: Tuner or USBDAC
TUNER mode (AM/FM): Pressing this button changes modulation type.
USBDAC mode (
►
PLAY/PAUSE): Starts/Pauses track playback (the availability of this function depends on the software player
used).
7)
IR receiver.
8)
LCD display.
8
3
4
5
6
7
1
2
All manuals and user guides at all-guides.com
