Dante-MY16-AUD User Guide Version 1.41
Page 36 of 46
Configuring your Yamaha Equipment
The host Yamaha equipment in which you have installed your cards needs to be configured to match your desired
clock settings and sample rate. You will need to refer to the relevant Yamaha equipment manual for specific
instructions on configuring sample rates and word clock for that equipment.
Setting up clocking can be confusing: please refer to
ANNEX A: Dante Synchronization and Clocking
for detailed
information and diagrams on setting up system clocking.
Key configuration checks for the host Yamaha equipment for your Dante-MY16-AUD card:
If:
Your Dante-MY16-AUD cards are set to 48kHz and you want the host Yamaha equipment to derive its
clock from Dante
You will need to ensure that:
Your Yamaha host equipment has its Word Clock set to one of the Dante-MY16-AUD card slots
If:
Your Dante-MY16-AUD cards are set to 96kHz and you want the host Yamaha equipment to derive its
clock from Dante
You will need to ensure that:
None of your Dante-MY16-AUD cards has “Enable Sync To External ” set
Your Yamaha host equipment has its Word Clock set to one of the Dante-MY16-AUD card slots
The Yamaha host equipment has
double-speed
set for the Dante-MY16-AUD card slots (not double-
channel)
If:
You want the Dante network to derive its clock from its host Yamaha equipment
You need to ensure that:
the Yamaha host equipment has its Word Clock set to Internal
All installed Dante-MY16-AUD cards are set to the same sample rate as the Internal clock
One of the Dante-MY16-AUD cards has “Enable Sync To External ” set via the Clock Status tab in Dante
Controller
