manualshive.com logo in svg

Audient ASP2802, Operating Manual, Page: 52 / 113

Share
Download
Audient ASP2802 Operating Manual Download Page 52

Page -52-

© Audient Ltd

The monitor section of ASP2802 provides comprehensive control 
room monitoring options.

The circuitry is mostly passive with only one buffer stage before 
the balanced loudspeaker outputs - thus providing you with a 
tonally neutral and accurate monitor path.

There are a number of features that are very useful for checking 
the translation and content of your mixes.

Please refer to the diagram and numbering on the previous page 
when reading this section.

Source Selection

There are 5 sources that can feed the monitor section of 2802.

DAW Mix

 - a stereo line input found as balanced XLR 

connectors on the rear panel. This stereo input can be used to 
audition “in the box” mixes quickly and can also be fed into the 
main mix bus for more inputs at mixdown time! Useful!

DAW Foldback

 - a 2

nd

 stereo line input found as rear panel 

balanced XLR connectors. You may find this input very useful for 
auditioning headphone mixes that are created in the DAW.

EXT. Stereo

 - a 3

rd

 dedicated external stereo input found as 

balanced rear panel XLR connectors. Intended for use as a 
two-track return for mixdown devices such as DAT machines, 
1/2” and 1/4” tape machines and other devices.

AUX 1 

&

 AUX 2 

- an internal feed from both 

auxiliary masters, use to audition headphone 
mixes or balances into send effects processing.

i-JACK

 - a front panel located stereo mini jack 

connector (8). Designed for use with portable music 
players and the like - great to audition rough mixes 
as MP3 etc. A level control is available for this input
also (7).

Monitor Section

Summary of Contents for ASP2802


















































































































Reviews:

No comments