Audient ASP2802 Page 112 Operating Manual Download | Manualshive

Page: 112 / 113

background image

Page -112-

© Audient Ltd

Warranty

Your ASP2802 comes with a manufacturer’s warranty for one
year from the date of dispatch to the end user.

The warranty covers faults due to defective materials used in
manufacture and faulty workmanship only.

During this warranty period Audient will repair, or at its discretion
replace, the faulty unit provided it is returned carriage paid to an
authorised Audient service centre. We will not provide warranty
repair if in our opinion the fault has resulted from unauthorised
modification, misuse, negligence, act of God or accident.

We accept a liability to repair or replace your ASP2802 as described
above. We do not accept any additional liability. This warranty
does not affect any legal rights you may have against the person
who supplied this product – it is additional to those rights.

Limitations

This warranty does not cover damage resulting from accident or

misuse. The warranty is void unless repairs are carried out by

an authorised service centre. The warranty is void if the unit has

been modified other than at the manufacturer’s instruction. The

warranty does not cover components which have a limited life,

and which are expected to be periodically replaced for optimal

performance. We do not warrant that the unit shall operate in any

other way than as described in this manual.

«
...
110
111
112
113
»

Summary of Contents for ASP2802


















































































































Reviews:

No comments

Related manuals for ASP2802

Brand: BANLAW Pages: 32

Brand: Baker Instrument Company Pages: 24

Brand: Yardistry Pages: 9

Brand: SALUDA MEDICAL Pages: 61

Brand: Panasonic Pages: 174

Brand: Mainca Pages: 21

Brand: Daktronics Pages: 30

Brand: DAKOTA ULTRASONICS Pages: 28

Brand: JB-Lighting Pages: 32

Brand: W&H Pages: 72

Brand: Nautilus Pages: 17

Brand: National Instruments Pages: 6

Brand: Parkside Pages: 95

Brand: Wasp Pages: 50

Brand: Yamaha Pages: 45

Brand: Gardco Pages: 17

Brand: H&S Pages: 42

Brand: Aeroflex Pages: 211

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands