Audient ASP2802 Operating Manual Download Page 84

Page: 84 / 113

Page -84-

DAW Ethernet Connection (Mac)

You can use standard Cat-5e Ethernet cable to connect
ASP2802 to your studio DAW computer. The interface in
ASP2802 is compatible whether you use a straight through
or cross-over cable.

Please ensure that you have downloaded and installed
the latest version of our

AuNet.dmg

application from

www.audient.com

On Apple computers please ensure that

AuNet

added to your applications folder via drag and drop.

Macintosh HD > Applications

You can enable the application to always boot upon user log-in,
therefore preventing any forgetfulness!

To achieve this, do the following:

System Preferences > Accounts > (select the account you

wish to alter on the left hand side) > Login Items Tab > Add

New Application (+ Button) > Browse and select

AuNet

Everytime this user
account opens,

AuNet

should now

boot.

Summary of Contents for ASP2802


















































































































Search results

Summary of Contents for ASP2802

Reviews:

Audient ASP2802, Operating Manual, Page: 84 / 113

Search results

Summary of Contents for ASP2802

Reviews: