Audient ASP2802, Operating Manual

Page: 78 / 113

Page -78- © Audient Ltd
Connections
Master Section Connections (top left to right)
ASP2802 connects to your DAW via IP based networking
protocols, and as such the first connector of interest in the
master section is a standard
RJ-45 CAT-5e Ethernet port, which
provides bi-directional high speed communication to your DAW
and carries MIDI automation data as well as control surface
protocols. There are two LEDs that indicate network connection
and activity.
The Main Speaker , Alt Speaker, Aux 1 & 2, Cue and Main Mix
outputs are on balanced male XLR connectors with <75 ohms
output impedance and a maximum output level of +27 dBu.
The DAW Mix , DAW F/B and External Stereo inputs are
on balanced female XLR connectors with >10k ohms input
impedance and a maximum input level of +27 dBu.
Two stereo FX Returns and the External Compressor inputs are
provided on balanced 1/4” TRS jack, with an input impedance
of >10k ohms and a maximum input level of +27 dBu.
The External Compressor outputs are provided on balanced 1/4”
TRS jack and have an output impedance of <75 ohms with a
maximum output level of +27 dBu.
The Main Mix Inserts are also on balanced 1/4” TRS jack with
the send jacks providing an output impedance of <75 ohms and
a maximum drive capability of +21 dBu, while the return jacks
offer >10k ohms input impedance with +21 dBu of maximum
input level.
The Mains Power input is a stand 3-pin IEC connector with
integrated fuse, it will accept line voltages from 90-264v. The
fuse is a T2A slow-blow.
The Headphone output is an unbalanced, stereo TRS 1/4” jack
connection with enough current drive to cause hearing damage
if driven hard -
BE CAREFUL , protect your ears!