Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Unplug electrical connector from actuator for camshaft adjust‐
ment.
– Remove bolts -1- and -2- for connector rail.
– Push ignition coil connector towards ignition coil, release re‐
tainer and detach connector from ignition coil.
– Place connector rail slightly to one side. Make sure that wiring
is not kinked or damaged.
– Position puller - T40039- on thick rib -arrow- at top of ignition
coils and detach all ignition coils from spark plugs one after
the other in direction of -arrow-.
– Unscrew spark plugs using spark plug socket and extension -
VAS 3122B- .
Step 2 - removing spark plugs, cylinder bank (left-side):
– Move line -arrow- clear at air pipe.
– Release hose clips -1- and -3- and detach air pipe.
Audi A8 2010 ➤
Maintenance - Edition 11.2014
96
3. Maintenance