5
.
1
.
2
Steps, Distance and Calories
Steps Walked
Distance
Calories
The EMBi will display the number of steps you have walked. For an
accurate reading, we recommend that you ensure that the details
entered in the personal information section are as accurate as possible
(please refer to 5.2.2).
The EMBi will calculate the distance you have walked from the number
of steps that you have taken. For an accurate reading, we recommend
that you ensure that the details entered in the personal information
section are as accurate as possible (please refer to 5.2.2).
The EMBi will calculate the calories you have burnt according to the
number of steps you have walked.
5
.
1
.
3
ECG
ECG
5
.
1
.
4
Heart Rate
Heart Rate
When you enter heart rate mode, the EMBi will begin measuring your
heart rate. This can take up to a minute. Once finished, the EMBi will
vibrate and display your current heart rate in BPM (beats per minutes).
5
.
1
.
5
Messages
Messages
When you enter ECG mode, and touch the ECG metal contact piece,
EMBi will begin measuring your ECG. When the ECG is measured,
touch your finger on the entire metal piece, and keep your finger still
during the measurement. This can take about 30 seconds. Once
finished, the ECG data can be checked on AUDAR.
Note: If the ECG waveform is disordered or drifts seriously, the heart
rate and blood pressure may not be accurate, so please re-measure.
If the skin of the finger is dry, please wet the skin or dip water on the
metal piece and measure again. Measurements are for reference only
and are not for medical use.
When you enter Messages mode, the EMBi will show a summary of
the messages on your phone. Press and hold the touch button for 3
seconds, and the EMBi will show detailes of the messages.
5
.
1
.
6
Find Device
Find Paired Device
Press and hold the touch button for 3 seconds to activate the ‘Find
Paired Device’ function. The paired device will ring or vibrate depending
on its settings, allowing you to locate it.
Note: the paired device needs to be within Bluetooth range in order to
be found (10m). If you are not able to hear the device, try moving to
another room and activating the function again.
