AUDAC Multi-functional SourceCon MFA208, User Manual

Page: 7 / 32

7
POWER SUPPLY AND POWER CORD REQUIREMENTS
Power supply class I grounding requirements:
For protection from fault currents, the equipment shall be connected to a grounding terminal. Plug the system
power cord into an AC outlet that provides a ground connection. Substitute cords may not provide adequate fault
protection. Only use the power cord supplied with this product or an authorized/equivalent replacement
Safety notices:
Denmark:
Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord.
Finland:
Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
Norway:
Apparatet må tilkoples jordet stikkontakt.
Sweden:
Apparaten skall anslutas till jordat uttag.
EC DECLARATION OF CONFORMITY
This product conforms to all the essential requirements and further relevant specifications
described in following directives: 2014/30/EU (EMC) and 2014/35/EU (LVD)
CAUTION - SERVICING
This product contains no user serviceable parts. Refer all servicing to qualified service personnel.
Do not perform any servicing (unless you are qualified to)
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)
The WEEE marking indicates that this product should not be disposed with regular household
waste at the end of its life cycle. This regulation is created to prevent any possible harm to the
environment or human health.
This product is developed and manufactured with high quality materials and components which
can be recycled and/or reused. Please dispose this product at your local collection point or
recycling centre for electrical and electronic waste. This will make sure that it will be recycled in
an environmentally friendly manner, and will help to protect the environment in which we all live.
COOLING & VENTILATION
The MFA2xx series amplifiers are relying on convection cooling to keep the maintenance low and eliminate any
production of ambient noise. The convection cooling system can only work properly when all ventilation openings
are not blocked and accessible, allowing free and natural air flow through the unit.
When using in a tabletop setup, the bottom of the housing shall keep distance from surface (table, shelf, ... )
through the mounted feet underneath to let air reach the ventilation openings on the bottom of the housing. The
top side ventilation slots shall also remain open with sufficient clearance above the unit.
When installed (multiple) unit(s) in an equipment rack housing, at least one free rack space shall remain blank
on top and bottom of the unit, remaining sufficient clearance for guaranteeing a proper air circulation thoughout
the unit.