AUBO AUBO-i3, User Manual

Page: 42 / 177

V4.5
©2015-2019 AUBO.All rights reserved.
38
5
Robot cable is
connected to the
robot body One end of the robot
body cable connected to
the robot body is a
straight pipe aviation
plug. First unscrew the dust
cap on the robot body
interface from the
socket; align the pins
of the plug and the
socket with the socket
respectively. The
judgment mark is
whether the gap on the
socket and the
protrusion on the plug
are aligned, and then
insert the plug. In the
socket; rotate the
fastening nut on the
plug clockwise (in the
direction of the plug
toward the socket) until
you hear a 'click',
indicating that the
connection is
successful.
Pay attention to the following when connecting cables
1.
Make sure the robot is grounded (electrical ground) in the correct way.
The grounding connector should have at least the rated current of the
highest current in the system.
2. Make sure that all cables are properly connected before the control
box is energized. Always use the original power cord correctly.
3.
Never disconnect the robot cable while the robot arm is open.
4. Do not extend or modify the original cable.