6
display will show T01 for a second and then change to the cook time setting for step 1.
Use “+” and “-“ keys to change the setting. When finished, press the SET again to
confirm the change. The display will go to the step 2 setting. The following is the flow
chart for the setting procedure.
Fig 4, Temperature profile programming flow chart.
The temperature setting will not be changed if SET is not pressed (confirmed). After
programming the necessary steps for cooking, you can finish programming by pressing
the SET continuously until it passed T06 and displays the current temperature. You can
also leave the controller alone. The display will return to the normal display mode if no
key is pressed within 15 seconds.
The initial program setting for the controller is for smoking salmon. The temperature
profile is programmed to start at 120 °F for 1.5 hour of smoking, rise to 132 °F for 2.5
hours and finish at 175 °F for 1 hour. The recipe is from Kummok:
http://forum.bradleysmoker.com/index.php?topic=107.0
If you like more moisture in the fish and serve it within a day, the last step (175 °F) can be
