51
Saf
ety P
recautions
●
If any liquid other than plain water gets on the product
• If anything other than water (seawater, washing detergent,
alcohol, etc.) gets on the product, immediately rinse with
water.
• Wash with slightly weak running water (less than 6 liters/
minute) with tap water (5
℃
to 35
℃
) at a position about 10 cm
away from the faucet or shower.
• If the product gets soiled, wash by hand without using a brush,
etc., holding the product so that the card slot cover does not
open.
●
After the product gets wet
•
After becoming wet, drain water and wipe the product with a dry,
clean cloth.
• In cold regions, any water on the product may freeze. Using
the product with frozen water may cause malfunction. Do not
leave water drop on the product.
●
Rubber seal
• The rubber seal around the card slot cover is important in
maintaining water resistance. Do not scratch or remove it.
• Be careful not to pinch the rubber seals when closing the
card slot cover. Trying to close the cover with a seal pinched
can scratch the seal and affect water resistance. Any minute
particles becoming lodged between contact surfaces (a
single hair, etc.), no matter how small, can cause seepage.
• Any liquid other than water (alcohol, etc.) on the product can
affect product durability.
• Do not insert pointed objects in the card slot cover. Doing so
may damage/deform the product or scratch the seal, allowing
water seepage.
• Parts used for maintaining water resistance should be
replaced every 2 years regardless of their appearance.
Contact your nearest au shop for replacement.
●
Heat resistance
• Do not submerge the product in hot water or get it wet with
hot water. Do not use the product in saunas or expose it to
hot air from hair dryer etc. Product is not designed to be heat
resistant.
●
Shock
• The product is resistant to shock, but product shock
resistance assumes usage in daily situations; subjecting the
product to excessive shock such as by throwing or causing/
letting the product fall forcefully may break the product.
