45
Saf
ety P
recautions
●
Take care not to place magnetized items such as magnetic
cards, speakers and TV sets near the product as it might
cause malfunction.
Putting strong magnetism close to the product might cause
false operation.
●
Do not bring magnetized cards such as cash cards, credit
cards and prepaid cards closer to the product. Doing so
may result in loss of recorded information.
●
When you put the product in your pocket or bag, take care
so that the display does not come in contact with metal
objects or other hard objects. Not doing so may cause
scratching or damage. Straps with metal or other hard
parts that may come in contact with the display may cause
scratching or damage.
●
When suddenly brought into a warm place from a cold
place,
or when in a humid location, or when used where
temperature suddenly changes (e.g. near the air discharge
port of an air conditioner), water droplets (i.e. condensation)
sometimes are formed inside the product. Note that when
used under conditions such as this, humidity might cause
corrosion or a fault.
●
Camera lens or inside of the display may mist over
(dew formation) because of usage environment such as
temperature or humidity. This is not malfunctioning or
abnormal.
●
Environment for easily generating dew formation on the
camera lens or inside of the display
In the following cases, such as large temperature change or
high humidity, camera lens or inside of the display mist over
because of usage environment.
・
Bring the product from a high temperature land into a low
temperature water.
・
Bring the product from a cold place into a warm place
such as an indoor.
・
Open/Close the card slot cover, etc. in a high humidity
environment.
●
How to reduce condensation
Do not use the product in places that get hot and humid, and
sandy or dusty places. Leave the product with the card slot
cover opened for a while until the condensation is cleared
when the ambient temperature is held constant.
●
While writing/reading data to/from a microSD memory card,
do not subject the product to vibration or impact, or turn off
the power. Doing so may cause data loss or malfunction.
●
Do not cover the sensor with your finger or put a sticker on
it. May hinder the sensor from detecting the ambient light
level and functioning correctly.
●
Do not put a sticker, etc. on the proximity sensor. May cause
the sensor to malfunction and make the display always
turned off while receiving a call or during a call or make it
impossible to deactivate sleep mode.
●
Any soiling on the proximity sensor may cause misoperation.
Wipe the sensor with a soft, dry cloth.
