14
Get
ting R
ead
y
◎
Do not touch the terminal part of microSD memory card.
◎
Do not pull out the microSD memory card forcefully.
Doing so might cause a fault or loss of data.
◎
After using the product for a long time, the removed
microSD memory card may become warm. This is not a
malfunction.
◎
When you remove the microSD memory card, be sure to
dismount the card properly.
Charging
The internal battery is not fully charged at the time of
purchase. Charge the battery before using the product.
When the red light turns into green, the charging will be
completed.
◎
The product may become warm while charging or during
other operations, this is not abnormal.
◎
Charging the product while using the camera function,
the charging time may take longer than usual.
◎
Doing various operations with the specified charger (sold
separately) connected, the battery life may get short due
to the short time charging/discharging.
◎
When temperature of environment or the product is
extremely high or low, charging may be stopped. Charge
the battery at room temperature as much as possible.
◎
Make sure the connection is correct if the charging light
of the product blinks in red. If the charging light continues
to blink, immediately stop charging, and contact an au
shop or Repair and Delivery Service Center.
◎
Right after "
" is displayed while charging, the
charging light may not turn to green, but the light will turn
to green soon and the charging will be completed.
◎
Keep a metal accessory or conductive materials (metal
pieces, pencil lead, etc.) from coming in contact with the
connection terminal and prevent them from getting inside.
