ATX 22 Type-S, Owner'S Manual

Page: 15 / 100

INTRODUCTION | 14
If your Boat is operated in salt or brackish water, special precaution,
such as cleaning and flushing the boat after each use, both internally
and externally, are required. Failures or altered finishes due to salt water
exposure or corrosion are not covered by the ATX Surf Boats Limited
Warranty.
Towers are configured by ATX Surf Boats for factory-installed
components. The installation of any components onto the tower of
any ATX Surf Boat after it leaves ATX Surf Boats’ factory (“Non-Factory
Tower Components”) may require adjustments to the tower. Further,
certain Non-Factory Tower Components may not be suitable to be
installed on any ATX Surf Boat’s tower. If ATX Surf Boats determines that
any Non-Factory Tower Components have caused or contributed to the
need for any repairs to the tower of an ATX Surf Boat, or to any other
aspect of an ATX Surf Boat, ATX Surf Boats, in its sole discretion, may
deny coverage for such repairs. It is the sole and exclusive obligation
of the Purchaser to verify and ensure that all Non-Factory Tower
Components are suitable to be installed on any ATX Surf Boat’s tower,
and that all Non-Factory Tower Components are properly installed on
any ATX Surf Boat’s tower.
This Limited Warranty does not provide coverage for any component part
that is at any time covered by any warranty provided by any third party,
other than ATX Surf Boats, including, but not limited to the manufacturer
of the component part. Component parts shall include, but are not
necessarily limited to, any items that are fastened to the boat through
either mechanical means (screws/bolts) or chemical means (adhesives),
which may or not be manufactured by ATX Surf Boats. Some examples
of component parts include displays, carpet, floor panels, upholstery
substrates and bases, etc. In the event that any warranty coverage for
any component part is rendered or deemed void due to actions of
the Purchaser or any third party other than ATX Surf Boats, this Limited
Warranty will not provide warranty coverage for the component part.
Gel Coat, Powder Coat and Other Finishes Limited Warranty
Note: Minor distortions or imperfections resulting from the handcrafted ap-
plication of the gel coat on an ATX Surf Boat are considered normal and
unavoidable . Gel coat, powder coat and other finishes maintenance is the
Purchaser’s responsibility . Conditioned on the Purchaser having provided
and performed all gel coat, powder coat and other finishes maintenance
and care described in this Owner’s Manual, for a period of twelve (12)
months, beginning on the date of the original retail purchase or the initial
use of the ATX Surf Boat, whichever occurs first, ATX Surf Boats will repair
materials, or workmanship supplied by it, in applying the gel coat and/or
powder coat finish to the boat, or other finishes to the boat, which are de-
termined by ATX Surf Boats to contain substantial manufacturing defects .
This Gel Coat, Powder Coat and Other Finishes Warranty shall not include
or provide coverage for gel coat finish, blistering, discoloration, scratching,
cracks caused by negligence, impact or collision, stress crazing, fading
or osmosis, or damage caused by in-water storage, scratches and other
damage caused by trailering, including normal usage . Failures or finishes
due to salt water exposure or corrosion are not covered by the ATX Surf
Boats Limited Warranty .
Limited Warranty Exclusions and Limitations
In addition to any prior limitations and exclusions, the following are
NOT
covered under this Limited Warranty:
• Normal maintenance of the ATX Surf Boat
or any component thereof;
• Normal wear-and-tear of the ATX Surf Boat,
or any component thereof;